Concrete Grind and Seal FAQs

Our Clients Include:

Of course! It is possible to achieve a non-exposed aggregate finish since it is the depth of the grand that is responsible for the amount of stone/aggregate exposure in the finished product.

Yes! For those who have grown tired of looking at floor boards or carpeting, a fresh new look can be added to the concrete beneath them that offers a low maintenance, contemporary floor. The type of concrete MPA, the aggregate density and the amount of damage to the concrete will determine the overall finished look.

That’s no problem and when we have finished you it will be a sleek new concrete surface.

Once polyurethane and water base epoxy floors have cured Volatile organic compounds are extremely low.

Not if a non-slip additive is used. However, without this additive it can become slippery when wet.

The process involves using diamond discs that are mounted on a 400+ kilo grinder. This rough grit removes imperfections as it flattens the floor. After achieving the desired exposure level, a high grade coating is used to seal it. Special non-slip and UV additives can be added where needed.

Depending on the amount of traffic it receives, the durability of Grind and Seal floors allows them to last for 5 years or longer. To ensure a longer life, they can be re-sealed when necessary for a small cost.

Yes, but that is hard to do. Muriatic acid poured on the floor will result in etching and the shine destroyed by strong acids. Areas where etching have occurred can be repaired.

No. We use state of the art equipment that virtually eliminated all dust.

Residential, restaurants, warehouses, showrooms and retail stores as well as many outside areas have Grind and Seal concrete floors.

Get in touch for a free quote on 0417 214 901